Let's talk about our shops for a few minutes. Would you consider yourself a Neat Freak or a Slob? Or take it another step; a Pack Rat or Hoarder? For me, it's been kind of a roller coaster ride most of my life, but I've been paying more attention to my habits lately and I can only laugh at myself. I've been guilty of all the above at one point or another in my life.
Take a moment and think about your shop. How would you describe it, home to a neat freak or a slob? Do you consider yourself a pack rat? Are you happy when you go out to your shop and wouldn't change a thing about it or are you frustrated every time you try to do something in your shop because either you don't have the room or you can't find what you're looking for so you end up giving up and would rather not spend time out there.
I have come to the conclusion that the size of our shops really shouldn't be the excuse we use to say we just don't have enough room to organize everything. Not always will a bigger shop solve our problem. I've actually seen where a "bigger" shop only makes the problem "bigger". Here's an example: When I first went into business as a woodworker, I sub-leased a 3,000 sq.ft. shop with another guy that ended up moving out just a few months later, leaving me with the entire building and all the rent. I did not need that much square footage for a one man shop, but I ended up staying there for over 16 years before I moved my business to another state.
When it came time to move and decide what to keep and what I was actually going to move to the new location, I realize just how much of a Pack Rat I had been over the years. I found things that I hadn't seen in years (actually forgotten about). I found things that made me wonder what I was thinking at the time to posses me to keep it in the first place. Some things where really easy to decide to get rid of, but some things where another story. I was so afraid that if I left it behind or threw it away, I was surely going to need it next month and be sorry I got rid of it. Sound familiar?
That was probably the best move I ever made to help me with my "Pack Rat" syndrome. Knowing there was no way I could take all that "stuff" with me, I had to force myself to make some harsh decisions. I finally had to develop a formula to help me decide what to do with each individual item. It can be pretty over whelming when you have 3,000 sq. ft of stuff you've been collecting over the past 16 years. I started with the very first item and first asked myself if I had used it in the past two years? Did my life depend on me keeping it or could I possibly live without it? Could I sell it and make some money to help pay for the move? Could I give it to a friend or donate it to a good cause?...........or should it just go to the trash like it should have years earlier? It was ridiculous how much value I had put on so much worthless junk. After going thru most of it, I finally contacted a fellow I knew that was known to be a pack rat and hired him to clean out the rest of the shop and haul to the land fill. I told him if he found anything of value, he could keep for himself. I had a good laugh when I returned a couple months later to see some things I recognized from my old shop sitting on his front porch and in his front yard.
Over the past few years, I've been slowly downsizing my shop and thinking seriously about what I would be keeping and what I would probably have to get rid of when it came time to retire my company and turn my love of woodworking into a hobby and not a full time business in a commercial building.
When we moved to Delaware this past March, the property we acquired was far from move in ready! I have a two story 24 x 28 shop that was filled to the brim and took many loads to the land fill to empty it out enough to start putting my stuff in there. I realized this past week-end I was adding more to what was still there. I was hanging things on nails that where driven in the wall years ago and I was doing nothing more then filling up the spaces that I just spent the past 10 months hauling off.
So that's what inspired me to write today. This week-end I started my total transformation of the shop I will be calling "My Shop". I've started in one corner and removed everything; whether it was mine or left over from before, every nail, bracket and storage cabinet back to the bare walls. I know I won't be happy until I have everything organized and put away. This should keep me busy for a while, but already one little corner has made me feel a lot better about my shop and myself.
So after spending the past few years downsizing, cleaning out and throwing away I've come to realize I have not suffered any unusual consequences in my actions. No mental anguish, no financial loss and no project suffered because I threw something away 6 months earlier! I'm beginning to like this new me.................the neat freak!
Tuesday, January 15, 2013
Friday, January 11, 2013
Let's "Ramble"........No, not "Rumble"!
One of the hardest things for me when it comes to writing on my blog is subject matter. It's not the lack of subject matter, but trying to decide what I would like to write about next. Too many thoughts race through my head at times!
If there is one thing that is pretty common with most woodworkers is; we have a tendency to have some strong opinions about things pertaining to woodworking. Like our favorite brand of tool, the best way to do a certain technique, what's the best wood to work with, what's the best finish and the best way to apply it. All you have to do is ask the question and before you know it, you're sorry you even asked. Well, maybe not all the time, but I've been part of a number of woodworking clubs, woodworking forums, groups of woodworking professionals, classes and I find a lot of "strong" opinions coming from a lot of woodworkers (myself included).
So I've decided this year when writing in my blog, no matter what the subject, I would like to tone it down a little and get off the high horse and not come across that It's my way or it's the wrong way, but instead make it more "food for thought".
I try not to jam my opinions down your throat, but I am passionate about my woodworking so I'm sure it's comes across that way now and then. I try to remember back when I first started woodworking and the difficulty I had and how I learned with time what worked best for me, not just because some other woodworker said that was the only way it should be done, but actually trying different things and settling on what was best for me, my skill level and the tools I had to work with.
A few topics I get pretty passionate about is; pricing your work, selling your work, marketing, being professional and quality work. I made my living from woodworking for over 25 years and one thing I've noticed, the topics I just mentioned had more to do with whether a woodworker would have a successful business than his woodworking skills alone, what type tools he had, what building techniques he used, what lumber was his favorite to work with or his favorite brand of stain or finish.
I never felt sorry for the woodworker that built crap and tried ripping off the customers and failed in business. They deserve to fail in my book.......But it always makes me sad when I see a very talented woodworker that builds beautiful projects and tries so hard to be fair to the customer only to fail because they don't know how to market themselves, how to price their work or have the confidence to sell their work for a fair a profitable price.
These are areas that I feel I can help the beginning woodworker as much as trying to teach him the best way to build a drawer or what table saw he should buy. So I will probably spend a lot of my time covering those topics this year and may even revisit them from time to time. Trust me, I won't be writing just about that, I do have a few projects I would like to do this year, so will try to keep you posted on those also, but for now, I've Rambled on enough
If there is one thing that is pretty common with most woodworkers is; we have a tendency to have some strong opinions about things pertaining to woodworking. Like our favorite brand of tool, the best way to do a certain technique, what's the best wood to work with, what's the best finish and the best way to apply it. All you have to do is ask the question and before you know it, you're sorry you even asked. Well, maybe not all the time, but I've been part of a number of woodworking clubs, woodworking forums, groups of woodworking professionals, classes and I find a lot of "strong" opinions coming from a lot of woodworkers (myself included).
So I've decided this year when writing in my blog, no matter what the subject, I would like to tone it down a little and get off the high horse and not come across that It's my way or it's the wrong way, but instead make it more "food for thought".
I try not to jam my opinions down your throat, but I am passionate about my woodworking so I'm sure it's comes across that way now and then. I try to remember back when I first started woodworking and the difficulty I had and how I learned with time what worked best for me, not just because some other woodworker said that was the only way it should be done, but actually trying different things and settling on what was best for me, my skill level and the tools I had to work with.
A few topics I get pretty passionate about is; pricing your work, selling your work, marketing, being professional and quality work. I made my living from woodworking for over 25 years and one thing I've noticed, the topics I just mentioned had more to do with whether a woodworker would have a successful business than his woodworking skills alone, what type tools he had, what building techniques he used, what lumber was his favorite to work with or his favorite brand of stain or finish.
I never felt sorry for the woodworker that built crap and tried ripping off the customers and failed in business. They deserve to fail in my book.......But it always makes me sad when I see a very talented woodworker that builds beautiful projects and tries so hard to be fair to the customer only to fail because they don't know how to market themselves, how to price their work or have the confidence to sell their work for a fair a profitable price.
These are areas that I feel I can help the beginning woodworker as much as trying to teach him the best way to build a drawer or what table saw he should buy. So I will probably spend a lot of my time covering those topics this year and may even revisit them from time to time. Trust me, I won't be writing just about that, I do have a few projects I would like to do this year, so will try to keep you posted on those also, but for now, I've Rambled on enough
Monday, January 7, 2013
Choosing wood for a project (part 2)
I recently read a comment made by a beginning woodworker that made me think about how many times I heard this exact sentiment stated over and over by many woodworkers over the years and it still gets a reaction from me. Have you ever heard someone or maybe even yourself say: I'm going to build my project with cheap lumber because I'd hate to screw up or ruin an expensive piece of wood.
I know this statement is usually based on the fact that we feel we don't have the woodworking experience to warrant using expensive wood to build a project, that we may mess up and then we wasted a good piece of wood for nothing. I've seen this excuse used with woodworkers that have actually been building for awhile but still lack the confidence to spend some money to buy beautiful lumber instead of shelving boards to build a project.
So let me make something perfectly clear before continuing; there is no right or wrong answer for this, but there are definitely two totally different ways of thinking about choosing lumber for a project (especially in the beginning). I've always been on the opposite side of the fence with this one. I've always felt that if I allowed myself to think that way, then I was giving myself an excuse to fail or screw up.
This started very early for me, in fact when I was in 9th grade shop class. We were to design and draw a set of plans for a project we would build later in the school year in wood shop. I drew a set of plans for a shelf unit to hang on the wall with 3 small drawers along the bottom. Later when I started wood shop, my instructor ask me what type wood I was going to make it from. We had a choice of pine, poplar or a wood called obeece.(looks a lot like Mahogany). Most of the other students where building their projects with poplar because it was cheap and easy to work with. Nope, not me, I decided I wanted to work with the obeece. I really liked the looks of the wood and since nobody else was using it, I had the best selection to pick from. It was more expensive then either the pine or poplar and I believe my teacher even tried to talk me out of it since this was really my first serious woodworking project, but I had no intention of failing and I was going to give it my best shot not to mess up or ruin any of the wood.
Here's the moral of the story; You can't make a silk purse out of a sows ear! The project turned out great because I took my time and made sure I thought out each process of building before I cut anything. At the end, I was very proud of my project and my Mom loved it.
Remember I said I built that project when I was in 9th grade, well I'm 63 years old now and when my Mom passed away this past October, I took that shelf down from her den and it's now in my home. (and I'm still proud of it!).
I never regretted building it with expensive wood, but I would have kicked my ass if I had spent all that time and effort and built it with some cheap wood. I'm just saying......Don't let the lack of confidence make you choose what lumber you build a project with, but let it motivate you to do the very best you can and you'll probably surprise yourself.
Over the years, I've realized there are a lot of reasons we may choose a certain wood for a particular project. It may be for strength, durability, color, beauty and yes, even the cost factor, but let's hope that's because of other reasons then just the lack of confidence in our abilities.
What else is important when choosing your lumber for a project? Selection, quality, variety and the ability to hand select my own lumber are all important factors for me. The big box stores don't give you much choice when it comes to different species of hardwoods. Your hobbyist woodworker stores like Woodcraft may give you a little more variety of hardwoods, but your selection in each species is usually pretty limited and you do pay a premium for their lumber.
It will take some searching and time to find a real lumber yard that carries a good selection of hardwoods, exotic woods and sheet goods, but it's well worth the effort. That's why I've always enjoyed buying lumber from the Hardwood Store in Gibsonville, NC. When I first started woodworking, one of the hardest things I had to learn was where to buy lumber and supplies. Finding a reputable lumber dealer should be one of your first priorities if you plan on doing much woodworking at all, even as a hobbyist.
When I'm selecting lumber for a project, I'm looking for a number of things from each board. I want as much consistency in color from one board to the other, I'm looking at grain pattern and/or figure. I'm not real particular with width, as long as it's not ridiculously narrow or way too wide. I'll forgive a little warp, twist or bow if it's got great color or grain pattern. It's it's not too bad, I've learned to work around some defects. Speaking of which, even if a board has a bad spot in the middle, if the rest of the board has the color and grain I'm looking for I'll consider it. One thing I've learned over the years is to buy a little more lumber then you might have figured in your plans. If I figured I need 100 bd. ft. of Cherry to build a project, I will probably pick out 115 to 125 bd ft. just to be on the safe side.
I would much rather have a little lumber left over at the end of a project, then have to try to squeeze some scrape lumber into my project to finish it or even worse, having to go get more lumber to even finish the project. If I have 10, 15 or even 25 bd ft. of lumber left over from one project, you can bet your bottom dollar it will get put to good use down the road. It's always handy to have a piece or two of different hardwoods available at any given time.
Once I select my lumber and get it back to the shop, I start the selection process all over again. I like to lay out all my lumber so I can see all the boards at once and select which boards I'm going to use for each part of the project. For example; if my project has a lot of raised panel doors and drawer fronts like a set of kitchen cabinets or even a large wall unit or home entertainment center, I would pick out the lumber I want to use for the panels since that will be making the biggest statement when looking at the front of the project. I want the most consistent color and grain pattern for those so when everything is built the wood flows nicely from one door or drawer front to another and one cabinet to another. Next I'll pick out the lumber for the stiles and rails for the doors trying to keep color as close as possible to the lumber I picked out for the panels and drawer fronts. The grain pattern won't be quite as important for these since they will only be a few inches wide and usually have a profile around the edge, so the grain doesn't show up as much. Next would be the stiles and rails for the cabinets and finally moldings, etc. I will even mark each board with chalk so I can keep track during the building process.
Another thing I will do and I'm sure a lot of shops won't do because it's not the most effective way to use your lumber, but if I find a board that I really like the grain pattern in the middle, but the rest of the board is just so so, I've been known to take that piece right out of the middle of a board so I can use it for a door panel or something that I feel the grain pattern will highlight the best. I can always use the rest of the board for something small and insuffinicant elsewhere. Sometimes not the best use of wood, but as long as I get the look I'm looking for, then it's worth it. I don't waste wood, just selectively use it elsewhere.
That brings me back to what I said earlier about sometimes buying a board that may be a little warped or twisted simply because the color and grain is what I'm looking for. If it's not too bad, then a lot of times you can either straighten it out when you get to the shop or work around it. Example: I always cut my long stiles (whether it's for a door or cabinet front) from the flattest, straightest boards I have. A lot of times, the rails are so short that you can work around a board that has a small about of bow or warp to it. That's why I like to select the different lengths because I would much rather work the bow or warp out of a shorter board then trying to work it out in a 8 or 10 ft. board first and then cut it down to shorter lengths anyway, besides, if the board has much bow or twist then you will end up having to take way too much off from a long board to get it flat.
Also going back to what I mentioned earlier about buying more lumber then the project may call for gives me a chance to pick out a board or two that is really different then anything else in the pile. I've found some really awesome boards in the middle of a bundle of lumber. There may be only one board like it, so it's almost impossible to use it in a bigger project, but I love adding something like that to my order just to have for making a special box or an accent piece.( for the really fun projects).
I realize most of the projects I've built have been large and requires a larger quanity of lumber then maybe what you would normally use doing a project or two as a hobbyist, but I've also built hundreds of small projects and I like to be just as fussy about picking my lumber for those also.
I'll finish by challenging you to try this if you are a beginning woodworker and have been a little intimidated by using more expensive lumber on a project. I would challenge you to pick a very small project (maybe a small box) and buy a really nice piece of lumber and build it for a friend or loved one. Take your time, keep it simple and let the beauty of the wood make the statement. It will make you feel good and I'll guarantee they will love it.
I know this statement is usually based on the fact that we feel we don't have the woodworking experience to warrant using expensive wood to build a project, that we may mess up and then we wasted a good piece of wood for nothing. I've seen this excuse used with woodworkers that have actually been building for awhile but still lack the confidence to spend some money to buy beautiful lumber instead of shelving boards to build a project.
So let me make something perfectly clear before continuing; there is no right or wrong answer for this, but there are definitely two totally different ways of thinking about choosing lumber for a project (especially in the beginning). I've always been on the opposite side of the fence with this one. I've always felt that if I allowed myself to think that way, then I was giving myself an excuse to fail or screw up.
This started very early for me, in fact when I was in 9th grade shop class. We were to design and draw a set of plans for a project we would build later in the school year in wood shop. I drew a set of plans for a shelf unit to hang on the wall with 3 small drawers along the bottom. Later when I started wood shop, my instructor ask me what type wood I was going to make it from. We had a choice of pine, poplar or a wood called obeece.(looks a lot like Mahogany). Most of the other students where building their projects with poplar because it was cheap and easy to work with. Nope, not me, I decided I wanted to work with the obeece. I really liked the looks of the wood and since nobody else was using it, I had the best selection to pick from. It was more expensive then either the pine or poplar and I believe my teacher even tried to talk me out of it since this was really my first serious woodworking project, but I had no intention of failing and I was going to give it my best shot not to mess up or ruin any of the wood.
Here's the moral of the story; You can't make a silk purse out of a sows ear! The project turned out great because I took my time and made sure I thought out each process of building before I cut anything. At the end, I was very proud of my project and my Mom loved it.
Remember I said I built that project when I was in 9th grade, well I'm 63 years old now and when my Mom passed away this past October, I took that shelf down from her den and it's now in my home. (and I'm still proud of it!).
I never regretted building it with expensive wood, but I would have kicked my ass if I had spent all that time and effort and built it with some cheap wood. I'm just saying......Don't let the lack of confidence make you choose what lumber you build a project with, but let it motivate you to do the very best you can and you'll probably surprise yourself.
Over the years, I've realized there are a lot of reasons we may choose a certain wood for a particular project. It may be for strength, durability, color, beauty and yes, even the cost factor, but let's hope that's because of other reasons then just the lack of confidence in our abilities.
What else is important when choosing your lumber for a project? Selection, quality, variety and the ability to hand select my own lumber are all important factors for me. The big box stores don't give you much choice when it comes to different species of hardwoods. Your hobbyist woodworker stores like Woodcraft may give you a little more variety of hardwoods, but your selection in each species is usually pretty limited and you do pay a premium for their lumber.
It will take some searching and time to find a real lumber yard that carries a good selection of hardwoods, exotic woods and sheet goods, but it's well worth the effort. That's why I've always enjoyed buying lumber from the Hardwood Store in Gibsonville, NC. When I first started woodworking, one of the hardest things I had to learn was where to buy lumber and supplies. Finding a reputable lumber dealer should be one of your first priorities if you plan on doing much woodworking at all, even as a hobbyist.
When I'm selecting lumber for a project, I'm looking for a number of things from each board. I want as much consistency in color from one board to the other, I'm looking at grain pattern and/or figure. I'm not real particular with width, as long as it's not ridiculously narrow or way too wide. I'll forgive a little warp, twist or bow if it's got great color or grain pattern. It's it's not too bad, I've learned to work around some defects. Speaking of which, even if a board has a bad spot in the middle, if the rest of the board has the color and grain I'm looking for I'll consider it. One thing I've learned over the years is to buy a little more lumber then you might have figured in your plans. If I figured I need 100 bd. ft. of Cherry to build a project, I will probably pick out 115 to 125 bd ft. just to be on the safe side.
I would much rather have a little lumber left over at the end of a project, then have to try to squeeze some scrape lumber into my project to finish it or even worse, having to go get more lumber to even finish the project. If I have 10, 15 or even 25 bd ft. of lumber left over from one project, you can bet your bottom dollar it will get put to good use down the road. It's always handy to have a piece or two of different hardwoods available at any given time.
Once I select my lumber and get it back to the shop, I start the selection process all over again. I like to lay out all my lumber so I can see all the boards at once and select which boards I'm going to use for each part of the project. For example; if my project has a lot of raised panel doors and drawer fronts like a set of kitchen cabinets or even a large wall unit or home entertainment center, I would pick out the lumber I want to use for the panels since that will be making the biggest statement when looking at the front of the project. I want the most consistent color and grain pattern for those so when everything is built the wood flows nicely from one door or drawer front to another and one cabinet to another. Next I'll pick out the lumber for the stiles and rails for the doors trying to keep color as close as possible to the lumber I picked out for the panels and drawer fronts. The grain pattern won't be quite as important for these since they will only be a few inches wide and usually have a profile around the edge, so the grain doesn't show up as much. Next would be the stiles and rails for the cabinets and finally moldings, etc. I will even mark each board with chalk so I can keep track during the building process.
Another thing I will do and I'm sure a lot of shops won't do because it's not the most effective way to use your lumber, but if I find a board that I really like the grain pattern in the middle, but the rest of the board is just so so, I've been known to take that piece right out of the middle of a board so I can use it for a door panel or something that I feel the grain pattern will highlight the best. I can always use the rest of the board for something small and insuffinicant elsewhere. Sometimes not the best use of wood, but as long as I get the look I'm looking for, then it's worth it. I don't waste wood, just selectively use it elsewhere.
That brings me back to what I said earlier about sometimes buying a board that may be a little warped or twisted simply because the color and grain is what I'm looking for. If it's not too bad, then a lot of times you can either straighten it out when you get to the shop or work around it. Example: I always cut my long stiles (whether it's for a door or cabinet front) from the flattest, straightest boards I have. A lot of times, the rails are so short that you can work around a board that has a small about of bow or warp to it. That's why I like to select the different lengths because I would much rather work the bow or warp out of a shorter board then trying to work it out in a 8 or 10 ft. board first and then cut it down to shorter lengths anyway, besides, if the board has much bow or twist then you will end up having to take way too much off from a long board to get it flat.
Also going back to what I mentioned earlier about buying more lumber then the project may call for gives me a chance to pick out a board or two that is really different then anything else in the pile. I've found some really awesome boards in the middle of a bundle of lumber. There may be only one board like it, so it's almost impossible to use it in a bigger project, but I love adding something like that to my order just to have for making a special box or an accent piece.( for the really fun projects).
I realize most of the projects I've built have been large and requires a larger quanity of lumber then maybe what you would normally use doing a project or two as a hobbyist, but I've also built hundreds of small projects and I like to be just as fussy about picking my lumber for those also.
I'll finish by challenging you to try this if you are a beginning woodworker and have been a little intimidated by using more expensive lumber on a project. I would challenge you to pick a very small project (maybe a small box) and buy a really nice piece of lumber and build it for a friend or loved one. Take your time, keep it simple and let the beauty of the wood make the statement. It will make you feel good and I'll guarantee they will love it.
Sunday, January 6, 2013
Choosing wood for your projects (part 1)
I'll start off by giving you a quick update on building the passenger cars for my steam locomotive. It's been pretty cold so I usually stay away from much finish work in this type weather, but I was getting pretty anxious to see how the passenger cars would look with some final finish on them.
I finished building the wheels and trucks for the passenger cars so all the building is complete now. I did take a couple space heaters out to the shop and warmed things up the other day so I could do some spraying. I've had the passenger cars here in the house since I finished building and brought the lacquer and spray gun in the house also. I have an insulated cabinet I keep my finishes in, but they still get pretty cold so I like to fool the finishes and warm them up for a day or two in the house before using them.
Once I got the shop up to temp. I shut the heaters off so I could spray. Exhaust fan in the window and ready to spray. I love using pre-catalyzed lacquer because of the fast flash over time. I can spray two or three coats of finish on in a very short period of time (before the shop drops much in temp.).
Since the shop is warm, the product is warm from being in the house and the projects are warm because they also have been in the house, the lacquer thinks the spraying conditions are perfect and sprays and flows out perfectly. Before the shop cools down too much, everything is dry enough to move back to the house. Tracy is getting used to the smell of freshly sprayed lacquer in the house when I bring a project back to the house to finish curing. The smell is usually gone in a few hours (or at least we get used to it).
The passenger cars look pretty good, but I will actually rub them down with #0000 steel wool here in the next day or two to really get the look and feel I'm going for.
No pictures today, but will post some later. Now this brings me to the title of this post; Choosing wood for your projects. I usually don't pick a certain wood for a project simply because it's inexpensive or it's easy to work with or it's easy to finish. I like my wood to make a statement for my project, even building something like this train.
The next car I want to build for my steam engine is a coal hopper. I've been building the entire train so far out of walnut and using a little maple and cherry now and then for some accent pieces, but now I want to work with something all together different for an all together look for this car.
Here is one reason I'm considering using a different wood this time for the coal hopper. When I originally started this train over 10 years ago, I had a bunch of walnut left over from a number of different projects so decided that would be a good wood to build the steam engine from. I loved the look! I had planed the walnut to different thickness for building the steam engine, so when I finished building the steam engine and coal tender (and bridge), I kept the remaining wood in a box. It's hard to believe, but after all those years and moving my shop a couple times, when I decided to build the passenger cars, I knew exactly where my left over walnut was and I knew I had enough to build the passenger cars.
What really surprised me, when I finished the passenger cars and put them with the steam engine and coal tender I realized there was a huge difference in the darkness of the walnut from the steam engine and coal tender to the passenger cars even though they were built from the same lumber, just 10 years later. At first this really bothered me, but then had to convince myself that a real train is not all the same color so there was no need to get my skives in a bunch.
So all that being said, I decided since the passenger cars looked different then the engine and coal tender, then why not make the coal hopper another color also.
If you've ever been around a train yard or you've seen a train that is hauling coal, all the coal hoppers look the same. They're Black! So I want to make my coal hopper black but I don't want to paint it, so since I have a bunch of scrape Wenge left over from a project I did a couple years ago, I believe I'll use that to build this next car. If you're not familiar with Wenge, It's a wood native to Africa that's very dense and very, very dark, almost black when finished. It almost looks like Oak with an Ebony dye applied.
Like I said, Wenge is a very dense wood and can be quite difficult to work with because it likes to splinter and blow out when trying to mill it. That's all part of the challenge though. I love the look of the wood and think it will be the perfect choice for this project.
So for this particular project, even though the wood is very dense and difficult to work with, I think it will make a nice contrast for the rest of the train. Just wait until I get to the caboose! I already have a couple ideas of what wood I would like to use for that. What color are most cabooses? Can everyone say "RED" ?
I believe I'm going to make this a 2 part entry for choosing wood for your projects, because the actual idea for writing this entry had nothing to do with my train and is based on other factors all together, so check out my next blog entry and follow along and see if any of this will relate to you and your woodworking.
I finished building the wheels and trucks for the passenger cars so all the building is complete now. I did take a couple space heaters out to the shop and warmed things up the other day so I could do some spraying. I've had the passenger cars here in the house since I finished building and brought the lacquer and spray gun in the house also. I have an insulated cabinet I keep my finishes in, but they still get pretty cold so I like to fool the finishes and warm them up for a day or two in the house before using them.
Once I got the shop up to temp. I shut the heaters off so I could spray. Exhaust fan in the window and ready to spray. I love using pre-catalyzed lacquer because of the fast flash over time. I can spray two or three coats of finish on in a very short period of time (before the shop drops much in temp.).
Since the shop is warm, the product is warm from being in the house and the projects are warm because they also have been in the house, the lacquer thinks the spraying conditions are perfect and sprays and flows out perfectly. Before the shop cools down too much, everything is dry enough to move back to the house. Tracy is getting used to the smell of freshly sprayed lacquer in the house when I bring a project back to the house to finish curing. The smell is usually gone in a few hours (or at least we get used to it).
The passenger cars look pretty good, but I will actually rub them down with #0000 steel wool here in the next day or two to really get the look and feel I'm going for.
No pictures today, but will post some later. Now this brings me to the title of this post; Choosing wood for your projects. I usually don't pick a certain wood for a project simply because it's inexpensive or it's easy to work with or it's easy to finish. I like my wood to make a statement for my project, even building something like this train.
The next car I want to build for my steam engine is a coal hopper. I've been building the entire train so far out of walnut and using a little maple and cherry now and then for some accent pieces, but now I want to work with something all together different for an all together look for this car.
Here is one reason I'm considering using a different wood this time for the coal hopper. When I originally started this train over 10 years ago, I had a bunch of walnut left over from a number of different projects so decided that would be a good wood to build the steam engine from. I loved the look! I had planed the walnut to different thickness for building the steam engine, so when I finished building the steam engine and coal tender (and bridge), I kept the remaining wood in a box. It's hard to believe, but after all those years and moving my shop a couple times, when I decided to build the passenger cars, I knew exactly where my left over walnut was and I knew I had enough to build the passenger cars.
What really surprised me, when I finished the passenger cars and put them with the steam engine and coal tender I realized there was a huge difference in the darkness of the walnut from the steam engine and coal tender to the passenger cars even though they were built from the same lumber, just 10 years later. At first this really bothered me, but then had to convince myself that a real train is not all the same color so there was no need to get my skives in a bunch.
So all that being said, I decided since the passenger cars looked different then the engine and coal tender, then why not make the coal hopper another color also.
If you've ever been around a train yard or you've seen a train that is hauling coal, all the coal hoppers look the same. They're Black! So I want to make my coal hopper black but I don't want to paint it, so since I have a bunch of scrape Wenge left over from a project I did a couple years ago, I believe I'll use that to build this next car. If you're not familiar with Wenge, It's a wood native to Africa that's very dense and very, very dark, almost black when finished. It almost looks like Oak with an Ebony dye applied.
Like I said, Wenge is a very dense wood and can be quite difficult to work with because it likes to splinter and blow out when trying to mill it. That's all part of the challenge though. I love the look of the wood and think it will be the perfect choice for this project.
So for this particular project, even though the wood is very dense and difficult to work with, I think it will make a nice contrast for the rest of the train. Just wait until I get to the caboose! I already have a couple ideas of what wood I would like to use for that. What color are most cabooses? Can everyone say "RED" ?
I believe I'm going to make this a 2 part entry for choosing wood for your projects, because the actual idea for writing this entry had nothing to do with my train and is based on other factors all together, so check out my next blog entry and follow along and see if any of this will relate to you and your woodworking.
Tuesday, January 1, 2013
" 2012 " in reflection
WOW! What a year! How bout you?
Was it a bad year for me? Not really; in fact, it turned out to be quite a life changing year overall. Part of it was planned, but the major changes were totally unexpected. I knew I was going to retire my company this past year and had been slowly down sizing the shop and scheduling work accordingly.
The biggest change accured when Tracy's great aunt passed away and she inherited a house, land and a couple rental properties in Delaware. After 14 trips from South Carolina to Delaware trying to handle the estate and take care of the properties, we decided that we would be better off if we just moved to Delaware until we could decide what to do with everything.
That's pretty much it in a nutshell!. Retired the company a couple months early, packed up everything we owned and moved to Delaware in March, 2012. Sounds simple enough, but for anyone that's moved both a shop and home 5 states away knows what's involved!
Oh, and to throw a monkey wrench in the middle of all this, the house we moved to was anything but "move-in" ready. We've worked our tails off this year and I still have an endless list of "honey do's" to accomplish, but all-n-all, it's been a pretty rewarding year.
So what's planned for 2013? I'm not sure I would call them New Years resolutions, but I do have a few things I would like to accomplish this year.
1. The work around the house and rental property is a given, I'll just have to work on things as time and budget allows.
2. I have a great garage/shop that I've been working on, so this year I would like to focus on setting up more for woodworking so I can get back to making some projects. (other then just repair things for the house and duplex).
3. I finished writing my first book, but haven't done a thing about it, so this year I would like to find a way to get it published.
4. I've started writing again in my blog and would like to continue writing on a regular bases.
5. I would like to join at least one of the local woodworking clubs in the area and be more involved with other woodworkers.
6. I have a set of kitchen cabinets to finish building for Tracy's mother that was put on hold this past year, so it's time to start working on that project again.
7. And in all my spare time, I would like to do a little part-time work to help supplement our income.
Today is the first day of 2013, so if I plan on getting any of this done, I better get busy.
Was it a bad year for me? Not really; in fact, it turned out to be quite a life changing year overall. Part of it was planned, but the major changes were totally unexpected. I knew I was going to retire my company this past year and had been slowly down sizing the shop and scheduling work accordingly.
The biggest change accured when Tracy's great aunt passed away and she inherited a house, land and a couple rental properties in Delaware. After 14 trips from South Carolina to Delaware trying to handle the estate and take care of the properties, we decided that we would be better off if we just moved to Delaware until we could decide what to do with everything.
That's pretty much it in a nutshell!. Retired the company a couple months early, packed up everything we owned and moved to Delaware in March, 2012. Sounds simple enough, but for anyone that's moved both a shop and home 5 states away knows what's involved!
Oh, and to throw a monkey wrench in the middle of all this, the house we moved to was anything but "move-in" ready. We've worked our tails off this year and I still have an endless list of "honey do's" to accomplish, but all-n-all, it's been a pretty rewarding year.
So what's planned for 2013? I'm not sure I would call them New Years resolutions, but I do have a few things I would like to accomplish this year.
1. The work around the house and rental property is a given, I'll just have to work on things as time and budget allows.
2. I have a great garage/shop that I've been working on, so this year I would like to focus on setting up more for woodworking so I can get back to making some projects. (other then just repair things for the house and duplex).
3. I finished writing my first book, but haven't done a thing about it, so this year I would like to find a way to get it published.
4. I've started writing again in my blog and would like to continue writing on a regular bases.
5. I would like to join at least one of the local woodworking clubs in the area and be more involved with other woodworkers.
6. I have a set of kitchen cabinets to finish building for Tracy's mother that was put on hold this past year, so it's time to start working on that project again.
7. And in all my spare time, I would like to do a little part-time work to help supplement our income.
Today is the first day of 2013, so if I plan on getting any of this done, I better get busy.
Happy New Years to everyone!
Sunday, December 30, 2012
Back to the Train
Even though it's been the holiday season, I've still be able to squeeze in a few hours on my train. I've been working on the trucks and wheels, which is really pretty much the last of the building to be done on the passenger cars.
I started by making the sides for the trucks that included the springs, main cushion blocks and trunnion blocks. Each side consists of 6 different pieces to be manufactured ( 8 sides total). Next came the 16 wheels and 16 wheel flanges. Each wheel is 7/8" dia. x 1/4" thick and each wheel flange is 1" dia. x 1/8" thick. Once I centered, glued and clamped each wheel to the wheel flange I then drilled a 1/4" hole through each assembly for the axle.
Here's a picture that shows one of the wheel and wheel flanges (clamped while glue dries), a couple of the truck sides, one of the truck assemblies before the wheels and axles and one of the completed trucks.
Once I had the truck assemblies built, I made sure they where the right width for my track before they where mounted to the passenger cars. I also did a dry fit to the cars to make sure everything lined up properly and also turned and pivoted the way they are suppose to.
Another picture showing the trucks actually fitted to the car and on the curved track. Everything fits and lines up perfectly.
Now I'll be able to remove the trucks and start the finishing process on those. Once I spray sealer coats on those and steel wool everything down, I will be able to start the final finishing on everything. Right now it's too cold in the shop, so will probably put that off for a little while.
I still have to finish the assembly of the trucks for the second car, but all the parts are made so it's just assembly that's left. So far I have 17 hours in building the trucks and still have 3 or 4 more hours to go before I can start the finishing process.
Tomorrow is the last day of 2012. I hope everyone had a great year and may 2013 be even better.
I started by making the sides for the trucks that included the springs, main cushion blocks and trunnion blocks. Each side consists of 6 different pieces to be manufactured ( 8 sides total). Next came the 16 wheels and 16 wheel flanges. Each wheel is 7/8" dia. x 1/4" thick and each wheel flange is 1" dia. x 1/8" thick. Once I centered, glued and clamped each wheel to the wheel flange I then drilled a 1/4" hole through each assembly for the axle.
Here's a picture that shows one of the wheel and wheel flanges (clamped while glue dries), a couple of the truck sides, one of the truck assemblies before the wheels and axles and one of the completed trucks.
If you click on the picture you can see a little more of the detail
Once I had the truck assemblies built, I made sure they where the right width for my track before they where mounted to the passenger cars. I also did a dry fit to the cars to make sure everything lined up properly and also turned and pivoted the way they are suppose to.
Another picture showing the trucks actually fitted to the car and on the curved track. Everything fits and lines up perfectly.
Now I'll be able to remove the trucks and start the finishing process on those. Once I spray sealer coats on those and steel wool everything down, I will be able to start the final finishing on everything. Right now it's too cold in the shop, so will probably put that off for a little while.
I still have to finish the assembly of the trucks for the second car, but all the parts are made so it's just assembly that's left. So far I have 17 hours in building the trucks and still have 3 or 4 more hours to go before I can start the finishing process.
Tomorrow is the last day of 2012. I hope everyone had a great year and may 2013 be even better.
Monday, December 24, 2012
"Twas the night before Christmas
Twas the night before Christmas and all thru the house, not a creature was stirring not even a mouse. But out in my shop it was a different story, I had presents to finish or there would be no glory!
While the rest of the family was all snuggled in bed, I had a shop full of saw dust floating around my head. There's presents to finish and I wonder why I try, I can't even get this dang glue to dry!
I needed more clamps and a new saw blade or two, so what is this poor woodworker suppose to do? I've made my list and cut everything square, but no matter how hard I try it still doesn't seem fair.
I do this every year and I run out of time, so I think next year I'll just order on-line
.
I was about to give up and throw in the towel, when all of a sudden my dog commenced to howl! He usually only does this when he hears a fire truck, but running outside I realize it was the UPS truck.
The driver was dressed in a funny red suite; he might have been funny, but not very cute. I was not very happy with my late night intrusion, he only added to all my confusion. He unloaded some packages with all kind of labels, brought them in my shop and put em on the table.
It was hard not to notice what was written on the boxes, sitting on the table; names like Bosch, Dewalt and even Porter Cable. I wasted no time unwrapping each delight; new sander, more blades, everything was just right. Box after box I tore open with glee and began to realize I didn't have to be a woodworking wannabe!
.
I'm sure the lacquer has affected my thinking; was I sleeping, dreaming or just wishful thinking? I'll have to wake up soon, and finish the presents, but for now lets just say; "THAT'S MY STORY AND I'M STICKING TO IT!.
MERRY CHRISTMAS AND HAPPY HOLIDAYS.
While the rest of the family was all snuggled in bed, I had a shop full of saw dust floating around my head. There's presents to finish and I wonder why I try, I can't even get this dang glue to dry!
I needed more clamps and a new saw blade or two, so what is this poor woodworker suppose to do? I've made my list and cut everything square, but no matter how hard I try it still doesn't seem fair.
I do this every year and I run out of time, so I think next year I'll just order on-line
.
I was about to give up and throw in the towel, when all of a sudden my dog commenced to howl! He usually only does this when he hears a fire truck, but running outside I realize it was the UPS truck.
The driver was dressed in a funny red suite; he might have been funny, but not very cute. I was not very happy with my late night intrusion, he only added to all my confusion. He unloaded some packages with all kind of labels, brought them in my shop and put em on the table.
It was hard not to notice what was written on the boxes, sitting on the table; names like Bosch, Dewalt and even Porter Cable. I wasted no time unwrapping each delight; new sander, more blades, everything was just right. Box after box I tore open with glee and began to realize I didn't have to be a woodworking wannabe!
.
I'm sure the lacquer has affected my thinking; was I sleeping, dreaming or just wishful thinking? I'll have to wake up soon, and finish the presents, but for now lets just say; "THAT'S MY STORY AND I'M STICKING TO IT!.
MERRY CHRISTMAS AND HAPPY HOLIDAYS.
Subscribe to:
Posts (Atom)


