Thursday, December 20, 2012

Great progress on the Passenger Cars!

      I'm usually going crazy about this time of the year trying to finish a dozen or so woodworking projects for Christmas presents, but this year I decided to pass on trying to make something for everyone.  I'm using the excuse that we moved from SC to Delaware this year and I just haven't had the time to get the shop set up and build anything.
     I sure hope the family hasn't been following my blog, cause I've been putting some pretty serious hours in on making my passenger cars for the steam locomotive..........and enjoying every minute of it!
     A couple things I forgot to mention earlier;  As I said before, I built the steam engine for my Dad ten years ago and after he died in 2003, my Mom wanted me to have the steam engine back. Later I found a set of blue prints to make the passenger car, a coal hopper and the caboose, but didn't start anything for a long time.   Then a few years ago I decided to build not one, but two passenger cars and get back to working on the complete set.  After getting the floor plates and all the seats made for the two cars, they got tucked away in a cabinet and pretty much forgotten about for a couple years. 
     Every now and then I would find them and think; "I really need to get back working on these and finish what I started", but instead I would put them back in the cabinet and like the old saying goes; Out of site - Out of mind, which brings me to tell you a little about my new set up for a shop, because while setting up everything I found the cars again, only this time I kept them out and got inspired to get working again.
     Here on the property I have a detached two story, two car garage. ( about 25' x25').   In the garage I have 9 ft. ceilings and up stairs is a hip roof with windows on each end.  I have plenty of power to the garage and it was already wired with some receptacles and a couple 220v plugs.  I've installed a few 8ft. fluorescent light fixtures both down stairs and up.    I love having the complete upstairs to use for some of my smaller projects.  I have a couple working desk/benches along the front wall with the window so I can sit up there and work and watch the world go by at the same time. (this is where I work on the train).    I even hooked up the TV antenna and have a small TV and radio to keep me entertained.  I have a few of my cabinets mounted on the walls upstairs to keep all the extra hardware stored so it doesn't have to be downstairs with all the saw dust, etc.
     I used to love to do stained glass and still have all the supplies, so hope to get back into that also, but that's another story for later.
     The upstairs makes a perfect little workshop for working on my train.  I have everything set up and when I get done working (no matter for how long) I can just leave it there and not have to worry about picking everything up and putting it away.  I think that was one of the reasons I quit working on it the last time.  Trying to run a full time business and then switching over to work on something like the train for a half hour or so and then having to pick everything up so I would be ready for the next day for the business became too big of a hassle and took all the fun out of working on it.
     Anyway, back to the passenger cars. Here's a few pictures to show the progress.


  The past few days I've been working on making the diaphragms for each end of the cars, the ladders for each door ( 8 total) and making the hand rails for each ladder.


   I did a little final sanding on the cars and sprayed the first coat of sealer to see how things will look.  I'll steel wool everything down with #0000 steel wool before I put the final finish coats on, but I think I'll wait now until I finish building the rest.

    
     The last picture here shows that I can remove the top to the one car so we can see the interior.
 
      Now I get to start on making the truck assembly and wheels. There will be over 100 pieces just to make up the truck assemblies for the two cars, so I'm going to leave that for another post.
     What do ya think so far?

Thursday, December 13, 2012

Passenger Cars for my Steam Engine

     I've posted a few pictures of the Steam Engine, Coal Car and bridge in one of my earlier blogs, but I'll start this entry off with a picture I took after I started on the passenger cars.  The first picture shows the beginning of the frame work for the passenger cars.  When I started I thought it would be just as easy to build two passenger cars as one, but boy was that a joke!   When 26 seats turned into 52 seats, I soon realized this was going to be very time consuming. 

     I'd like to take a couple minutes to explain a little of what went into making each seat.  Each seat consisted of a double bottom cushion, double top cushion, a pedestal and then an 1/8" dowel to mount the entire seat assembly to the floor of the car body.  I decided to make the cushions from maple so I would have some color contrast.  Once I cut the basic size to each top and bottom cushion, I then had to do the final shaping by hand by carving, filing and sanding each one to the final shape.  I had to cut each back cushion at a 5 degree angle so when the cushions where glued together the backs would lean back like a regular seat. 

     I built each base from walnut and glued each seat to a separate base.  I then drilled and glued a short 1/8" dowel in each base.  After all 52 seats were built, I layed out the location on the floor of each car for the proper location of the seats and drilled a mounting hole for each seat and glued in place.   I sprayed a couple coats of finish on all the interior parts while I had easy access.

 
     From there I was ready to build the sides and the tops for the two cars.  Once the sides where built and the windows cut out ( 9 windows on each side) I did the window trim. 
 
 
     It's hard to realize that it took 10 pieces of wood to trim out each little window.  You do the math; 9 widows per side, four sides, 9 window per side and 10 pieces for each window.  360 Pieces!
 
     Each window was first framed out with a casing, then the casing was trimmed with the exterior molding (each corner mitered).   Each window shade was made with a thin piece of balsa wood and the bottom rim was made with 1/8" dowel, filed flat on one side and glued along the bottom edge of each shade.  I made the shades random lengths and mounted to the inside of each window.
 
     When that was done I took a small staining pencil and stained the trim a little darker then the rest of the car.  No finish has be applied yet to the exterior.
 
 
 I did make one small design change on one of the cars though.  I realized that once the sides and tops where permanently mounted you would not be able to really see very much of the interior, especially all the work on the seats, so I made one of the tops so it could be removed.  No big deal, but sure makes me feel better!
 
     I have 8 doors and 8 sets of steps to make next with a few other small details for the body of each car and then I will start on making the trucks.  I remember how complex the trucks are from making them for the engine and coal car, but that will be later. 
 
 

Tuesday, December 11, 2012

Back to the Railroad

     The holiday season sure makes it tough to find time to just sit and write for a while,but I did want to catch you up on my progress with making  the train.   I love when I get "off track" and forget about sticking with plans and just start designing things my way.  It's all part of the challenge!

     I'm still working on the passenger cars, but that's a very slow process and besides I had this wild idea and couldn't wait to see if I could do it.  I believe I mentioned in one of my earlier blogs that I wanted to display the train along the top of the headboard of our bed.   I'll post some pictures so you can better understand how that might work, but for right now, my focus was not just making some more straight track and have it run straight, but I wanted to see if I could build curved track and make it look like the train was coming out of the wall and across the top of the headboard!

     It's a challenge enough making the rails out of wood with all the cross ties, but making curved rails was going to be fun, especially since there are no plans to do such a thing.   The rails are somewhat like an "I" beam, so even though they are small, it's not too hard to run a profile on each side of the rails to make that, but that process won't work if you cut the rails in a curve first, so my only other option was to bend the rails once they were shaped like the "I" beam.

     I've never tried steam bending before, so I thought this would be a good time to learn.  I started reading up on how to "steam" wood and realized that it really wasn't that big of a deal.  The first thing was to make my straight rails ( decided to make them approx. 45" long), so I could attach them to the bridge I already built for the steam engine and coal car and that would allow a curve from the center section of the headboard to the back wall on the left side of the headboard so the train would look like it was coming out of the wall at about a 45degree angle.


      Sorry, really hard to get a good close up of the actual profile of the rails, but it gives you the idea.
Now it was time to build the steam box.  I built mine from some scrap plywood I had, but the next time I believe I will build it from PVC pipe instead. 

The one thing they recommend about steaming wood is to make the steaming box no bigger then necessary to put your wood in to be steamed.  Your wood also has to be supported in a way that the steam can penetrate the wood from all sides, in other words, you just can't lay the wood in the steaming box.  I took and drilled a small hole in each side of the box and slid a piece of coat hanger through from one side to the other.  I did this in four different locations along the length of the box so the  pieces I wanted to steam would be suspended on the wire cross bars.

Next I had to bore a large hole towards the end and make a plate that would be able to sit on the steam source and allow the steam to enter the box.  Oh, I forgot to mention, I needed a way to boil water to make steam and since I didn't have any other means, I moved my operation into our kitchen so I could use our stove.  Here's my set up once I had my box built, a pot of water on the stove and my steaming box stretched across the stove and counter.

     Before I steamed the rails I took a scrape piece of plywood and cut the shape of the curve I wanted my track to be. It was to be a template to use to clamp the rails to to make the curve.  The one mistake I made though; I made the jig to the exact curve I wanted the final track to be and didn't allow for the rails to actually spring back a little when they were taken off the form.  It turned out OK since the actual curve was not real critical and there was plenty of curve when I finished, but I'll have to remember that in the future if I do any steam bending where the radius is critical to the design.




Here's a picture of my famous steaming box set up in the kitchen!

Once I put the rails in the box and brought the water to a boil, I covered the opened end of the box with a towel.  Do not seal off the box tight, it will build up pressure and could explode.  It's amazing how hot it gets!  Make sure you are wearing gloves when you start handling this.   Since my rails are only 5/8" tall and 3/8" wide, it only had to steam about 15 minutes.

When I took the rails out of the steaming box, I immediately put them on the jig and starting in the middle, I clamped the rails to the shape of the template.  I let them stay on the clamps all night and the next morning when I removed the clamps, whoa-la, I had two curved rails!  That is so cool.

I made 45 cross ties out of Wenge, built a couple different spacing jigs and started gluing the cross ties to the rails.  This was a very slow process, since my spring clamps took up so much space, I could only glue 3 cross ties in place at a time.


So after 3 days of gluing, clamping, let dry, remove and do 3 more, I finally made it to the end!
 
Here's a picture of the track when finished and one picture of the track tied in with the train and how it will work on the top of our headboard.


     Now my next project will be to design and build a tunnel portal that will mount at the wall to give the appearance of the track actually coming out of the wall and across the top of the headboard.  When I get all the cars made for the train, it will reach from one side of the headboard to the other.
     Here's one more picture showing the train and just the bridge centered in the middle.  I'm thinking I will probably just run the track straight across the right side of the headboard, but who knows, I've got a couple more ideas floating around in my head so we'll see.



Thursday, November 29, 2012

Know your pricing

"How do I price my work?", or  "What should I charge for my work?". These are probably the most asked questions I get from either hobbiest that would like to sell some of their work to make a little money or the woodworker that is trying to decide if he should do this as a profession and if so, can he make any money doing so.  Either way,  I hope as a woodworker you know how to price your work, not only to survive, but to make a profit (doesn't always happen even in the best of times).
     One of the most critical areas of pricing that we all have a tendency to fall short on is understanding our true production cost.  If you don't understand or know your true production cost then your pricing is nothing more that a crap shoot because you have nothing to base your pricing on!

"Sell it for what the market will bear"; I hear that a lot as advice on how much you can get for your work, but I feel that's a very misleading statement and you really need to fully understand what it means before you settle for a price and you certainly can't base your prices strictly on that factor.  Here's my point; if it cost you $30.00 to build something, and you feel the market will only bear $20.00 for that same item, then you should go ahead and price it at $20.00 because "that's all the market will bear"?    I hope not!

So what does that mean?  Is that the only option you have or do you have to figure out how to build it for less then $20.00?  Or do you have to find a different product to sell?  Or Maybe you could find a different market for your product so you can sell it for more.   But before you get to that point and try to answer some of those question,  you really need to know what it truly cost to build it in the first place.

So let's take a look at how to determine a price for your work.
There are six things you need to consider when determining a price for what you build.  Too many times as a hobbiest, a woodworker feels that anything he or she makes above the cost of materials is profit and then try to apply that same thought process to business. It just doesn't work that way.
 Here are six thing you have to take into consideration:    
  • Material cost
  • Fixed overhead
  • Administrative cost (known as non-productive time and cost)
  • Actual time to produce
  • Labor cost.(What you would like to get paid for making and selling your product).
  • Profit


Material Cost: This is the starting point for figuring your cost to produce a project, but only the starting point.  Just make sure you list everything in your material cost. (lumber,hardware, finishes, and all the small materials like; glue, screws, nails, sandpaper, clean-up materials, etc.).

Fixed overhead:  This is your monthly bills to operate your business; like rent (or mortgage), electric, phone, internet, insurances, etc.  Total these up for the month so you will know how much it cost you to run your business. (if you divide that total by the total hours you work each month in your shop, you will know how much it cost you per hour to operate your business).
Example: If your overhead is $1,000/month =$12,000 year and you spend 50 hr./wk = 2,500hr./year.
                Divide $12,00 (overhead) by 2,500 (hours) = $4.80/hr.  This is what it cost you every hour to operate your business whether you are building anything or not.

Administrative Cost (known as non-productive time):  The average one man shop will spend approximately 25% of his time in non productive activities, (meeting with client's, doing proposals, running for materials, talking on the phone, advertising, marketing, cleaning up, etc.)

Actual time to produce:  If you're lucky enough to get to build a proto type first, you should know exactly how long it takes to build it.  If you're building it as a one on, then you need to know how long it will take you to build and finish each phase of your projects.  Whatever the case; you need to know how many hours it will actually take to build your project.

Labor cost:  How much would you like to make working for yourself?   One thing to remember; you will be paying all your own taxes, social security, health insurance, retirement.

Profit:  This is one area so many woodworkers don't even consider, but if you ever want to replace any tools or buy new or expand your business, you better figure in some sort of profit.

Now if you add up all the above segments to figuring your true cost of producing a project you will have your price you should sell your product for.  This will have nothing to do with "what the market will bear" or even if you can sell your product for that price, but simply a true picture of cost.  Then you decide if there is a market for your product, or if you need to see if you have to build it cheaper to be able to sell or maybe it's just not feasible to build and sell it for a profit.

Let's do an example so you may be able to better understand:  We're going to build a nice birdhouse in our example. 
Materials;  Lumber,dowel for perch and porch rail, glue, primer and paint.  Total $10.00
Your actual time to build and finish this birdhouse: 4 Hours.
Overhead; based on our earlier example @ $4.80 hr.
Labor: How much you would like to make.  Lets say $20.00/hr.
Profit:  Let's say you would like to make a 15% profit.

Now we can total up our total cost to produce this birdhouse     Materials:                $10.00
                                                                            Time to build:     4 hours
                                                                            Overhead 4 hrs. x $4.80                   $19.20
                                                                            Labor:  4 hrs. x $20.00                     $80.00
                                                                                                         Total:                $ 119.20
                                                                
This is your true cost to build this birdhouse.  Now if you want to make an actual profit on this birdhouse then you would have to add in your profit ( $119.20 x 1.15% = $137.08

So, if you sell your birdhouse for $137.08, then you would be able to pay for the materials, pay for your 4 hours of overhead that it took you to build it, pay yourself for the 4 hours it took for you to build it and you would make a $17.88 profit for the business.

Here's the real kicker; have you ever heard of a woodworker that says he just uses a multiplier to figure their selling price?  Some will say they take the material cost times 4 and that's what they will sell it for.  What's wrong with this picture?  First; it's obvious they have no idea what it truly cost to build their project and second; compare the two prices.  If you take the material cost of $10.00 and times it by 4, you only come up with $40.00.  Figuring it that way and you sold your birdhouse for $40.00, the only thing you would be able to pay for is the cost materials, the overhead and pay yourself about $2.55 hour and no profit (or if you want to say you made a profit, then you worked for absolutly Nothing!).

This is why so many woodworkers fail as a business. They just don't have a clue what the true cost of building a project really is and they somehow convince themselves they are selling their products for a profit. Don't fall into that trap!.

Holy Crap; can I sell my birdhouse for $137.08?
 Now you have a few question you have to ask yourself and find the answer to.
1. Is there a market for my $137.08 birdhouse?  (will the market bear it?).
2. If yes, then marketing is your next step.
3. If no; then what are my options?
    Can I find a way to build this same birdhouse faster and cheaper and if so, how much faster and cheaper?  Can I get it to a price point to be able to sell in my market?
    Or can I look for a different market that would "bear" the price I need to sell my birdhouse at?

Bottom line; when all is said-n-done, it may not be feasible to find a market for your birdhouse and you may have to find another product you can produce and sell for a profit.

This reminds me of a story I was told years ago about the farmer from up "north", went to Florida and bought a truck load of watermelons for $2.00 each.  He brought them back home and sold them at his produce stand for $1.00 each.  Needless to say, he sold out very quickly and when his neighbor asked him what he was going to do since he didn't make any money, he said; "Guess I'll have to get a bigger truck".

I have a whole chapter devoted to "pricing" in my book, but for here, I hope I can at least give you some ideas on how to look at your pricing.  There's still a lot more to it then that, but that's a start.
We'll talk about quality, marketing, image and some of the other factors later.

     











   

Sunday, November 25, 2012

Wood-n-Thoughts?

When I first decided to do a blog I had no idea what to write about or even what a blog was for.  Why did people do blogs?  Was it simply a way to share ideas, or another place where you get to tell people how to do things, or was it more like a journal.   I still don't understand the full meaning of doing a blog, but like so many others, I feel I should.

So how did I come up with the name for my blog?  I thought it was kind of clever myself, but then again, what do I know, I don't even understand doing a blog.   One thing is for sure, I have a passion for woodworking and love to share whatever knowledge I may have with anyone that is interested. Right or wrong, I'll let you be the judge of that.  My thoughts may not be on woodworking alone, but usually has a connection one way or another and my mind seems to race from one subject to another.  Yes; I've been told I'm ADD or ADHD or whatever label that is we like to put on someone who seems to have too much energy and can't keep it focused all the time.  I don't think my mind ever shuts down. 

I can design in my sleep, I will do complete installations in my sleep the night before I actually have to do the installation.  While working on one project, I'll be thinking of the next project I would like to challenge myself with.........and the thoughts go on and on!.

When I first started my blog, it was primarily for a customer of mine that I was doing a project for and I wanted to give them a way of checking up on the progress as I went along.  They lived in Pennsylvania and my shop was in South Carolina.  If you want to check it out or if you followed along at the time, it was all about building their gun cabinet.  The blog was a lot of fun, but I will have to admit, I would forget to take pictures as often as I probably should have, but overall I feel my first attempt at doing a blog turned out OK.  (the customer loved it!).

After that, I seemed to have lost interest in doing the blog, maybe not so much that I didn't want to do it but the simple fact that I really didn't think anyone would be that interested in following me build furniture or cabinets or talk about woodworking, so I pretty much dropped it.

 See, that's how I feel about face book.  I still can't figure out why people think the world is interested in everything they do in their life.  If I want someone to know something or if someone wants to know something about me, just ask me personally.............I don't need to tell the whole world about it!.

Now that I've spouted off about that, why the heck am I writing a blog?   Trust me, I have mixed feelings about it.  On one hand, I feel a blog is a lot like putting it out there on face book, but then on the other hand I keep trying to convince myself that anyone that is following a blog is interested in learning something more then just social gossip. 

So, if I do have any followers, I'll try not to waste a lot of time talking about my social life, putting pictures of my pets, grandchildren,or family reunions on my blog and try to keep it focused on woodworking and my thoughts about things concerning woodworking.

Over the years I've met so many interesting people that taught me so much not only about woodworking, but also about business, how to deal with people and how to deal with myself.  Every day has been a learning experience and each day I try to learn and understand more about woodworking, business, people and myself.

If there is one thing I've learned about woodworking (especially doing woodworking as a profession) is you need to know a lot more then just how to cut a board square! 

I've been writing a book during the past year; How to start a woodworking business, so I may cover a few of the topics here in my blog or at least expand on some of my thoughts about what it takes to start a woodworking business. 

In my last few blog entries, I've been talking about building a model steam locomotive and my plans to finish the entire train.  I would like to switch back and forth from that subject and talking about woodworking in general.    


Saturday, November 24, 2012

Building the railroad bridge and tracks

I had to build a 36" section of railroad track so the train would have something to sit on and the plans showed exactly how to build the rails and railroad ties.  That part of it was time consuming, but pretty straight forward to build, but I wanted someway to display the locomotive other then just setting on the track on a shelf.

So I decided to design and build a bridge that could be used simply by sitting on a shelf as a display for the locomotive or it could be used as a display shelf within itself.  There's a french cleat under the back side of the bridge to allow it to be hung on a wall. (In fact, that's the way my father displayed it).




I found the pole lights in a hobby shop, so mounted and wired those along the back side of the bridge.

 
 
 
 
Now that I've decided to build a couple passenger cars, a coal hopper and caboose, I will need a lot more track and "where" and "how" to display the whole train has created a new set of challenges.



So here's my idea; this is a picture of our bed headboard.  It's 10ft. wide with the light bar being about 4 inches lower then the two outside towers.  Not that the bridge for the train was originally designed to sit between the towers, but the bridge turned out to be 4 inches high, so it could work out perfectly to run the train across the entire width of the bed.........but that would be too simple!

I thought it would be neat to make the track curved coming off the left end of the bridge and have the track turn back towards the wall and have the track curve the opposite coming off the right end of the bridge and turn towards the front of the right tower.  With the train being over 10 foot long when completed, this would give me the length I need to display the entire train on top of our headboard.

I've got a couple more ideas for this project but will cover them another time.  I've been working on the curved track, so will talk about that phase of the build in my next blog.





Thursday, November 22, 2012

Let's look @ the plans for the locomotive

Happy Thanksgiving, 2012.
 
 
It's very quiet this morning, so a perfect time for a little writing. 
 
I would like to show you some pictures of the actual plans for building the locomotive.  You will see I really made a mess on each sheet, but only because I was keeping track of my time and I would     hi-lite each step as I completed it and wrote down the time it took to complete. 
 
I'm really glad I did, because it kept me focused on each step and I didn't get ahead of myself or forget where I was.........and I'm really glad I kept track of my time because at the end I was shocked how many hours I had invested.
 
 
The first page is nothing more than an exploded view of the overall  engine and coal tender.  As you can see these plans are based on the Reading Line (T-l) steam locomotive. 
 
Here's a few interesting facts about the T-1 steam locomotive.   It's a 4-8-4 freight locomotive,originally designed in 1949, and was made in Reading, PA 
 
T-1 Specifications
Length.....110ft,6in.
Weight on Drivers.....278,200 lbs.
Total Engine Weight.....441,300 lbs.
Total weight in working order, Engine and Tender.....809,000 lbs.
Tender Capacity.....19,000 Gallons Water and 26 Tons Coal
 
The approximate scale of model:  1/38
 
 
The very first thing I had to do to start the project was deciding what wood or woods I would use to build it with.  I love walnut and thought the natural color of walnut would make a good choice. I had a lot of scrapes of walnut laying around so felt I could probably build most of it without having to buy lumber.  I would find out later there would be pros and cons of using walnut! 
 
The very first piece I had to build for the locomotive was of course the boiler.  This would have to be turned on the lathe starting with a 2 1/2" x 2 1/2" x 16" blank.  Turning, sanding, laying out and drilling all required holes took 2 1/2 hours.   Wow!  One simple piece and 2/12 hours!  I knew right then and there I was in for a long project.
 
I'm not going into every piece and how long it took to make, but if you look at the following pictures, you can get an idea what was involved and how complex this piece was going to be. 
 
 
 
 
 
 


 
There is one little part that I had to make that turned out to be quite entertaining to make and that was the little "hand rail post" that run along the entire length of the boiler.  Let me see if I can describe one of them so you can get an idea what was involved in making each one (had to make 44 of them)
Each one was made from 1/4" walnut doweling.
Each one had a 3/32" hole drilled through the doweling 1/8" from the end.
Each hand rail post was only 1/2" in length.
Each end with the hole was rounded off by hand.
Trying to drill a 3/32" hole through a 1/4 dowel is one thing, but trying to hold on and round over the end was another. 
 
 
 
Taking each piece at a time and focusing only on that one and not worrying about the scope of the entire project helped me not to get overwhelmed. I learned so much about myself while building this locomotive.
 
I very seldom work with plans, especially plans from someone else, so having to build hundreds of pieces to someone else's specifications was a real learning experience.  PATIENCE; that was something I felt I was lacking in, but I found out that building something like this really test your patience almost every step of the way. 
 
Making very small items that would show up and be such a big part of the overall look of the final piece made me pay much more attention to small details.
 
Being used to building large items like Entertainment Centers, Furniture or complete set of Kitchen Cabinets, I found it took a totally different mind set to spend just as many hours as building something large as building something as small as this model. 
 
Little by little I began to see the shape of the locomotive develop before my eyes.  I would work for hours and it would seem like I wasn't getting anywhere, then all of a sudden things would begin to come together and I could see my progress.  
 
My biggest motivation was of course my Dad; knowing how much he would love it and appreciate all the work I put in it for him.  This was truly a labor of love.